| Sign In | Join Free | My isp.org.cn |
|
Brand Name : Sinof
Model Number : SF-13CAR2GR
Place of Origin : China
PTFE Molding Powder (SF-13CAR2GR)
Composition: 85% virgin PTFE, 13%±1% carbon coke, 2%±0.5%graphite powder
Technical Properties
| Mechanical Properties | Units | Test Method | Free Flow | NFF |
| Specific Gravity | g/cm³ | ASTM D4894 | 2.10±0.05 | 2.10±0.05 |
| Tensile strength | MPa | ASTM D4894 | ≥16 | ≥18 |
| Elongation at break | % | ASTM D4894 | ≥180 | ≥200 |
| Bulk Density | g/L | ASTM D4894 | 750±50 | / |
| Hardness | Shore D | NEEDLE | 61-56 | 61-56 |
| Diametric Shrinkage | % | INTERNAL | 2.0±0.5 | 2.0±0.5 |
| Flow | Sec/120g | INTERNAL | ≤5 | / |
| Average Particle Size | μm | ASTM D4894 | 550±100 | / |
| Recommended Molding Pressure | 400-450kg/cm2 | |||
| Max Sintering Temp. | 370-375℃ | |||
Attention:
This product is a fluoroplastic material. Normal precautions observed with fluoroplastics should be followed.
Packaging, Storage and Transportation:
1. The product is packed in two layers of plastic bags in a hard bucket with a net content of 25kg per barrel.
2. The products shall be transported as non-dangerous chemical. During transportation, prevent from humidity, intense vibration and package damage.
3. Products should be stored in a clean, cool and dry warehouse to prevent the mixing of dust, moisture and other impurities.

|
|
85% virgin PTFE Molding Powder SF-13CAR2GR with 13% Carbon Coke, 2% Graphite Powder Images |